Skip to contentSkip to conversation

how could i do ?

LARTC h l 3 participants 3 messages May 12, 2003

lore
Share & tools
lore

h l

author
#0 lore raw

there is a firewall and it's has 3 port working in router modul;eth0 : 192.168.1.116eth1 : 192.168.2.1eth2 : 192.168.3.1 i want to control bandwidth from eth0->eth1,how can i do it?

---------------------------------
Do You Yahoo!?
"相见不如聊天!不出门一样面对面!网络摄像头对对派送中~赶快用你的雅虎电邮帐号参与吧……

#1 lore raw
Quoted 3 lines · h l

there is a firewall and it's has 3 port working in router modul;eth0 :
192.168.1.116eth1 : 192.168.2.1eth2 : 192.168.3.1 i want to control bandwidth from eth0->eth1,how can i do it?

You can shape the outgoing packets on eth1. See lartc.org and docum.org for more info.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to h l

Hi

AFAIK

you can control the traffic on eth1, so the local traffic on eth0 will be faster

thanks
hare

----- Original Message -----
From: h l
To: [email protected]
Sent: Monday, May 12, 2003 3:27 PM
Subject: [LARTC] how could i do ?

there is a firewall and it's has 3 port working in router modul; eth0 : 192.168.1.116
eth1 : 192.168.2.1
eth2 : 192.168.3.1

i want to control bandwidth from eth0->eth1,how can i do it?

------------------------------------------------------------------------------
Do You Yahoo!? "?à??2?è?á?ìì!2?3???ò??ù??????£?í???é???í·?????é?í?D~???ìó???μ????¢μ?óê?êo?2?ó?°é?-?-